Home > Residual Current Device >

VKL11 ISI Mark Residual Current Device RCD

Product Categories

Residual Current Circuit Breaker RCCB [11]
RCCB TYPE B [10]
Residual Current Device [11]
UL489 Circuit Breaker [22]
RCD TYPE B [10]
ELCB Earth Leakage Circuit Breaker [11]
GFCI Circuit Breaker [10]
Splicing Connector [24]
Consumer Units [12]
RCBO Type B [11]
RCBO Type A [11]
Rotary Isolator [4]
Control And Protective Switching Device [4]
Pilot Indicator Light [5]
Dual Function Circuit Breakers [12]
Industrial Electric Controls [12]
PV System Protection [7]
PRCD Plug [9]

Yueqing Vorax Electric CO.,LTD

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

VKL11 ISI Mark Residual Current Device RCD

Ask Lasest Price
Brand Name :	HAROK
Model Number :	VKL11
Certification :	NF, SEMKO, VDE, KEMA, ISI, CE, INMETRO
Delivery Time :	4-6 weeks after payment
Supply Ability :	100,000 PCS PER MONTH

Add to Cart

Product Details
Company Profile

VKL11 ISI Mark Residual Current Device RCD

VKL11 Residual Current Device (RCD) ISI mark

1. General

1.1 Function

Control electric circuits.

Protect people against indirect contacts and additional protection against direct contacts.

Protect installations against fire hazard due to insulation faults.

Residual current circuit breakers are used in housing, tertiary sector and industry.

1.2 Selection

Detectable wave form

RCD Type	Suitable for electrical networks with
	Pulsated DC current	Harmonics	Switching surges
AC CLASS	No	No	No
A CLASS	Yes	No	No
S, ASi CLASS	Yes	Yes	Yes

A Class RCD may not work satisfactorily in electrical network distributed by harmonics & switching transients and may give nuisance triping.

AC class

Tripping is ensured for slowly increasing sinusoidal AC residual currents

A class

Tripping is ensured for sinusoidal AC residual currents and for pulsed DC residual currents, whether applied suddenly or increasing slowly.

ASi Type - Full type A features + Si: Super immused (High immunity to unwanted tripping)

Tripping is ensured not only for sinusoidal AC residual currents but also for pulsed DC residual currents whether applied suddenly or increasing slowly. S, G/SI type with filters against spurious tripping caused by harmonics and transient surges. With the impact of 8/20us surge 3000A, this high immunity RCCB will still be in stable status.

Note: Our ASi type includes G/KV function and Si function.

1.3 Approvals and certificates

We certify that the RCCB has been tested for the following routine tests as per IS: 12640 (Part 1):2016 and found to be complying

with the requirements.

1. Verification of the operating characteristic as per Seq. - D0 CL9.9

2. Verification of the operation of the test device at the limits of rated voltage as per Seq. - D1 CL9.16

3. High Voltage Test as per D.3 of Annex D

4. Test for standard values of break time and non- actuating time as per CL 5.3.12 (table -1)

Tripping sensitivity
10mA - precision instrument leakage protection and bathroom use.
30mA - additional protection against direct contact.
100mA - co-ordinated with the earth system according to the formula I△n < 50/R, to provide protection against indirect contacts;
300mA/500mA - protection against indirect contacts, as well as fire hazard.
Tripping time
Instantaneous
It ensures instantaneous tripping(without time-delay).
Short time delay ASi
(High Immunity/ Avoid nuisance tripping &blinding)
It ensures any tripping at least 10ms.
Selective
It ensures total discrimination with a non selective RCD placed downstream.
VKL11 ISI Mark Residual Current Device RCD

RCD | Residual Current Device

2. Technical parameters

	Standard	IEC/EN 61008-1 AS/NZS61008.1
Electrical features	Model No.	VKL11
	Poles	2P, 4P
	Rated current In	16A, 25A, 32A, 40A, 63A, 80A, 100A
	Rated Sensitivity I△n	10mA(2P/4P 16A,25A.32A/40A), 30mA, 100mA, 300mA
	Rated voltage Ue	2P: 240V 4P: 415V
	Insulation voltage Ui	415V
	Rated frequency	50/60 Hz
	Rated residual making and breaking capacity I△m	1500A
	Short-circuit current Inc=I△c	6000A, 10000A
	Type (wave form of the earth leakage sensed)	AC, A, ASi, S
	break time under I△n	≤0.1s(Normal type), 10ms~300ms(ASi type). 150ms~500ms(S type)
	Rated impulse withstand voltage(1.2/50) Uimp	4kV
	Dielectric test voltage at ind. Freq. for 1 min	2.5
	Pollution degree	2
Mechanical features	Electrical life	≥2000
	Mechanical life	≥2000
	Fault current indicator	Yes
	Terminal protection degree	IP20
	Ambient temperature (with daily average≤35℃)	-25℃ to 50℃
	Storage temperate	-30℃ to 70℃
Installation	Terminal connection type	Cable/Pin-type busbar
	Terminal size top/bottom for cable	25-35 mm²
	Terminal size top/bottom for cable	18-3/18-2 AWG
	Terminal size top/bottom for busbar	10/16 mm²
	Terminal size top/bottom for busbar	18-8/18-5 AWG
	Tightening torque	2.5 N·m
	Tightening torque	22 In-Ibs.
	Mounting	On DIN rail EN 60715 (35mm) by means of fast clip device
	Connection	From top and bottom

3. Outline and installation dimensions (mm)

Product Description:

Residual Current Device (RCD) is a reliable protection device for domestic and industrial applications. It is certified by the Brazilian Institute of Metrology, Quality and Technology (Inmetro) and is designed to protect people and equipment against electric shock. The RCD features a protection class of IP20, rated voltage of 240/415V AC, rated residual operating current of 30mA to 300mA and rated frequency of 50/60Hz. It provides a high level of safety in accordance with the safety standards and provides a safe and reliable protection from electrical shock. It is designed to detect any fault currents and cut off the power supply in time to prevent any potential electric shock or damage to the equipment.

Features:

Product Name: Residual Current Device
Protection Class: IP20
Rated Current: 30mA, 100mA, 300mA
Rated Voltage: 240/415V AC
Certificate: CE, ISI, NF, SEMKO, VDE, KEMA, INMETRO
Rated Humidity: ≤95%RH
Type: Type AC, Type A, Type ASi

Applications:

HAROK VKL11 Residual Current Device is a product that has been certified with Inmetro, NF, SEMKO, VDE, KEMA, ISI, INMETRO and CE. It has a rated current of 16A to 100A, as well as a rated residual operating current of 30mA, 100mA, 300mA and a rated voltage of 240/415V AC. The RCD is available in Type A, AC, ASi, and comes with a minimum order quantity of 1000. It is packed in paper carton and can be delivered within 4-6 weeks after payment. HAROK VKL11 Residual Current Device is reliable and has a supply ability of 100,000 PCS per month.

Technical Parameters:

Product Name	Technical Parameters
Residual Current Device	Rated Residual Operating Current: 30mA-300mA Rated Humidity: ≤95%RH Rated Impulse Withstand Voltage: 4kV Rated Short-Circuit Capacity: 10kA Rated Impact Endurance Voltage: 2kV Certificate: CE, ISI, NF, SEMKO, VDE, KEMA, INMETRO Protection Class: IP20 Rated Operating Temperature: -25℃~+40℃ Residual Current Device Type AC, Type A, Type ASi

Customization:

Residual Current Device VKL11 from HAROK

HAROK's Residual Current Device VKL11 is a reliable device that provides protection against indirect contact. It is certified by NF, SEMKO, VDE, KEMA, ISI, and CE, and is recognized for its safety and quality. It has a minimum order quantity of 1000, and is packaged in a paper carton. Delivery time is 4-6 weeks after payment, and a supply ability of 100,000 pieces per month.

VKL11 Specifications

Brand Name: HAROK
Model Number: VKL11
Place of Origin: CHINA
Certificate: CE, ISI, NF, SEMKO, VDE, KEMA
Rated Voltage: 240/415V AC
Rated Residual Operating Time: 0.1s
Protection Class: IP20

Packing and Shipping:

Packaging and Shipping of Residual Current Device

Residual current device (RCD) must be packaged with a sturdy box and with adequate cushioning material to protect it against shocks, vibration, dust, and moisture during transportation.

The following instructions must be followed when shipping RCD:

Ensure that the RCD is securely fastened in the box.
Ensure that the box is properly sealed to prevent water or foreign particles from entering.
Attach a label to the box indicating the contents and destination.
Ensure that the box is clearly marked with the words “Fragile” and “Handle with Care”.
Ensure that the box is properly labelled with the correct address and contact information.
Ensure that the package is shipped via a reliable carrier.

Product Tags:


*From:	Your email address is incorrect!
*To:	Yueqing Vorax Electric CO.,LTD
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!