Home > Residual Current Device >

VKL11 Residual Current Device RCD Type S Selective Time Delay

Product Categories

Residual Current Circuit Breaker RCCB [11]
RCCB TYPE B [10]
Residual Current Device [11]
UL489 Circuit Breaker [22]
RCD TYPE B [10]
ELCB Earth Leakage Circuit Breaker [11]
GFCI Circuit Breaker [10]
Splicing Connector [24]
Consumer Units [12]
RCBO Type B [11]
RCBO Type A [11]
Rotary Isolator [4]
Control And Protective Switching Device [4]
Pilot Indicator Light [5]
Dual Function Circuit Breakers [12]
Industrial Electric Controls [12]
PV System Protection [7]
PRCD Plug [9]

Yueqing Vorax Electric CO.,LTD

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

VKL11 Residual Current Device RCD Type S Selective Time Delay

Ask Lasest Price
Brand Name :	HAROK
Model Number :	VKL11
Certification :	NF, SEMKO, VDE, KEMA, ISI, CE
Delivery Time :	4-6 weeks after payment
Supply Ability :	100,000 PCS PER MONTH

Add to Cart

Product Details
Company Profile

VKL11 Residual Current Device RCD Type S Selective Time Delay

VKL11 Residual Current Device (RCD) type S Selective time delay

1. General

1.1 Function

Control electric circuits.

Protect people against indirect contacts and additional protection against direct contacts.

Protect installations against fire hazard due to insulation faults.

Residual current circuit breakers are used in housing, tertiary sector and industry.

1.2 Selection

Detectable wave form

RCD Type	Suitable for electrical networks with
	Pulsated DC current	Harmonics	Switching surges
AC CLASS	No	No	No
A CLASS	Yes	No	No
S, ASi CLASS	Yes	Yes	Yes

A Class RCD may not work satisfactorily in electrical network distributed by harmonics & switching transients and may give nuisance triping.

AC class

Tripping is ensured for slowly increasing sinusoidal AC residual currents

A class

Tripping is ensured for sinusoidal AC residual currents and for pulsed DC residual currents, whether applied suddenly or increasing slowly.

ASi Type - Full type A features + Si: Super immused (High immunity to unwanted tripping)

Tripping is ensured not only for sinusoidal AC residual currents but also for pulsed DC residual currents whether applied suddenly or increasing slowly. S, G/SI type with filters against spurious tripping caused by harmonics and transient surges. With the impact of 8/20us surge 3000A, this high immunity RCCB will still be in stable status.

Note: Our ASi type includes G/KV function and Si function.

1.3 Approvals and certificates

We certify that the RCCB has been tested for the following routine tests as per IS: 12640 (Part 1):2016 and found to be complying

with the requirements.

1. Verification of the operating characteristic as per Seq. - D0 CL9.9

2. Verification of the operation of the test device at the limits of rated voltage as per Seq. - D1 CL9.16

3. High Voltage Test as per D.3 of Annex D

4. Test for standard values of break time and non- actuating time as per CL 5.3.12 (table -1)

Tripping sensitivity
10mA - precision instrument leakage protection and bathroom use.
30mA - additional protection against direct contact.
100mA - co-ordinated with the earth system according to the formula I△n < 50/R, to provide protection against indirect contacts;
300mA/500mA - protection against indirect contacts, as well as fire hazard.
Tripping time
Instantaneous
It ensures instantaneous tripping(without time-delay).
Short time delay ASi
(High Immunity/ Avoid nuisance tripping &blinding)
It ensures any tripping at least 10ms.
Selective
It ensures total discrimination with a non selective RCD placed downstream.
VKL11 Residual Current Device RCD Type S Selective Time Delay

RCD | Residual Current Device

2. Technical parameters

	Standard	IEC/EN 61008-1 AS/NZS61008.1
Electrical features	Model No.	VKL11
	Poles	2P, 4P
	Rated current In	16A, 25A, 32A, 40A, 63A, 80A, 100A
	Rated Sensitivity I△n	10mA(2P/4P 16A,25A.32A/40A), 30mA, 100mA, 300mA
	Rated voltage Ue	2P: 240V 4P: 415V
	Insulation voltage Ui	415V
	Rated frequency	50/60 Hz
	Rated residual making and breaking capacity I△m	1500A
	Short-circuit current Inc=I△c	6000A, 10000A
	Type (wave form of the earth leakage sensed)	AC, A, ASi, S
	break time under I△n	≤0.1s(Normal type), 10ms~300ms(ASi type). 150ms~500ms(S type)
	Rated impulse withstand voltage(1.2/50) Uimp	4kV
	Dielectric test voltage at ind. Freq. for 1 min	2.5
	Pollution degree	2
Mechanical features	Electrical life	≥2000
	Mechanical life	≥2000
	Fault current indicator	Yes
	Terminal protection degree	IP20
	Ambient temperature (with daily average≤35℃)	-25℃ to 50℃
	Storage temperate	-30℃ to 70℃
Installation	Terminal connection type	Cable/Pin-type busbar
	Terminal size top/bottom for cable	25-35 mm²
	Terminal size top/bottom for cable	18-3/18-2 AWG
	Terminal size top/bottom for busbar	10/16 mm²
	Terminal size top/bottom for busbar	18-8/18-5 AWG
	Tightening torque	2.5 N·m
	Tightening torque	22 In-Ibs.
	Mounting	On DIN rail EN 60715 (35mm) by means of fast clip device
	Connection	From top and bottom

3. Outline and installation dimensions (mm)

Product Description:

Residual Current Device

Residual Current Device (RCD) is a safety device designed to protect people from electric shock and other potential danger. It can detect the presence of a fault current and quickly disconnect the circuit, so that the fault current is interrupted to protect the safety of people from electric shock.

This product is certified CE, ISI, NF, SEMKO, VDE, KEMA and has a rated operating temperature of -25°C to +40°C. The rated current is 30mA and the rated short-circuit capacity is 10kA.

Residual Current Device is an important safety device in electrical system and it is widely used in many places such as industrial plants, office buildings, homes, etc.

Features:

Product Name: Residual Current Device
Rated Residual Non-Operating Time: 5s
Rated Residual Operating Current: 30mA, 100mA, 300mA
Rated Current: 16A, 20A, 25A, 32A, 40A, 63A, 80A, 100A
Rated Residual Operating Time: 0.1s
Rated Operating Temperature: -25℃~+40℃
Type: AC, A, ASi, B, B+, F

Applications:

HAROK VKL11 Residual Current Device is designed to detect and trip on leakage current in electrical wiring systems in order to protect people and other devices from potential electric shock. It is ideal for use in domestic, commercial and industrial applications. The device is certified by NF, SEMKO, VDE, KEMA, ISI, CE and has a minimum order quantity of 1000. Delivery time is 4-6 weeks after payment and the company has a supply ability of 100,000 PCS PER MONTH. The Rated Impulse Withstand Voltage is 4kV.

The HAROK VKL11 Residual Current Device is available in three types: Type AC, Type A and Type ASi. It has a wide range of applications from domestic to commercial and industrial applications. The device is designed to detect and trip on leakage current and protect people and other devices from potential electric shock. The product comes in a PAPER CARTON packaging and is easy to install and maintain. It is a reliable and cost-effective solution for protecting people and their property from electrical hazards.

Technical Parameters:

Parameter	Value
Product Name	Residual Current Device
Type	AC, Type A, Type ASi
Rated Impulse Withstand Voltage	4kV
Rated Frequency	50/60Hz
Rated Current	16A, 20A, 25A, 32A, 40A, 63A, 80A, 100A
Rated Insulation Voltage	500V
Certificate	CE, ISI, NF, SEMKO, VDE, KEMA
Protection Class	IP20
Rated Residual Operating Current	30mA, 100mA, 300mA

Customization:

Residual Current Device Type UL1053 (HAROK VKL11)

Brand Name: HAROK
Model Number: VKL11
Place of Origin: CHINA
Certification: NF, SEMKO, VDE, KEMA, ISI, CE
Minimum Order Quantity: 1000
Packaging Details: PAPER CARTON
Delivery Time: 4-6 weeks after payment
Supply Ability: 100,000 PCS PER MONTH
Rated Residual Operating Current: 30mA, 100mA, 300mA
Rated Humidity: ≤95%RH
Rated Operating Temperature: -25℃~+40℃
Rated Current: 16A, 20A, 25A, 32A, 40A, 63A, 80A, 100A
Rated Impulse Withstand Voltage: 4kV

Packing and Shipping:

Packaging and Shipping of Residual Current Device

The Residual Current Device (RCD) should be packaged and shipped in a secure manner to protect it from damage caused by external factors. The packaging material should be shock absorbent and suitable for shipping given its size and weight.

During packaging, the RCD should be placed in a box and secured with bubble wrap or packing peanuts to minimize movement while in transit. If the RCD is to be shipped internationally, it should also be packaged in a way that meets all international customs and export regulations.

The RCD should be shipped via a reliable carrier with a tracking system to ensure that it is delivered safely and in a timely manner. Additionally, it is important to purchase the appropriate level of insurance to cover any potential damage or loss during shipment.

Product Tags:


*From:	Your email address is incorrect!
*To:	Yueqing Vorax Electric CO.,LTD
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!